Specialized/Customized/Optimized CAE Solutions Provider    專業化/客制化/最佳化 CAE 服務
English


Home
Software
Consultancy
Partners
e-Learning

Contact
SmartDO
ADINA
ANSYS
LS-DYNA



公益活動
產品簡介
Brochure

adina logo
eNews 2009/02/11 : ADINA在生醫領域之應用 - 論文搜集

由於ADINA領先的結構非線性與FSI功能為全球公認, 故許多生醫方面的尖端研究, 當需要使用到CAE分析時, ADINA都是唯一首選.本期電子報, 我們搜集了從2003年以來, 應用ADINA在生醫領域的一些代表性論文.

(附註) 請注意此處許多論文聯結, 讀者需向提供處付款. 若讀者有國內各大專院校或研究機構圖書館電子期刊帳號, 可嘗試由該帳號搜尋聯結.



2008
中文: 頸動脈粥樣硬化斑塊 形成 與 斑塊薄壁壓力 之 負向關聯研究--以Vivo核磁共振為基礎之 二維/三維 流固耦合模型
原文: "A Negative Correlation between Human Carotid Atherosclerotic Plaque Progression and Plaque Wall Stress: In Vivo MRI-Based 2D/3D FSI Models"
作者與出處: Dalin Tang, Chun Yang, Sayan Mondal, Fei Liu, Gador Canton, Thomas S. Hatsukami, and Chun Yuan, Published in final edited form as: J Biomech. 2008; 41(4): 727–736.
連結: http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2291514&tool=pmcentrez

中文:  寬關節手術於流體傳導 植入參數 之影響....
原文: "Effects of Implant Design Parameters on Fluid Convection, Potentiating 3rd Body Debris Ingress into the Bearing Surface during THA Impingement/Subluxation"
作者與出處: Hannah J. Lundberg, Douglas R. Pedersen, Thomas E. Baer, Marian Muste, John J. Callaghan, and Thomas D. Brown J Biomech. Author manuscript; available in PMC 2008 January 1. PMCID: PMC1945119
連結: http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=1945119&tool=pmcentrez


2007
中文: 溫度對於 白血球 限度萃取,表面拉伸 與 皮質張力 之影響
原文: "Effect of Temperature on Tether Extraction, Surface Protrusion, and Cortical Tension of Human Neutrophils"
作者與出處: Baoyu Liu, Craig J. Goergen, and Jin-Yu Shao /Department of Biomedical Engineering, Washington University, Saint Louis, Missouri Biophys J. 2007 October 15; 93(8): 2923–2933. Published online 2007 June 22. doi: 10.1529/biophysj.107.105346. PMCID: PMC1989717
連結: http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=1989717&tool=pmcentrez

中文: 生物軟組織之 彈性流體動力潤滑 之 有限元素模擬
原文: "Finite Element Simulation of Elastohydrodynamic Lubrication of Soft Biological Tissues"
作者與出處: Taraneh Moghani, James P. Butler, Judy Li-Wen Lin, and Stephen H. Loring Comput Struct. Author manuscript; available in PMC 2007 November 21. PMCID: PMC2084068
連結: http://www.pubmedcentral.nih.gov/articlerender.fcgi?artid=2084068&tool=pmcentrez#R11


2006
中文: 特定病患之 腹部動脈瘤 流固耦合分析: 與結構應力模型之比較
原文: "Fluid structure interaction of patient specific abdominal aortic aneurysms: a comparison with solid stress models"
作者與出處: Leung JH, Wright AR, Cheshire N, Crane J, Thom SA, Hughes AD, Xu Y BioMedical Engineering OnLine 2006, 5:33 (19 May 2006)
連結: http://www.biomedical-engineering-online.com/content/5/1/33  
                                                                                                                                                                                                                                                                                                   
中文: 胸部動脈瘤 之 3D幾何重建及分析
原文: "3D geometric reconstruction of thoracic aortic aneurysms"
作者與出處: Alessandro Borghi, Nigel B Wood, Raad H Mohiaddin, and X Yun Xu Biomed Eng Online. 2006
連結: http://www.biomedical-engineering-online.com/content/5/1/59 
                                                                                                                                                                                                                                                                                                   
中文: 使用三維流固耦合分析軟體  量化 斑塊結構 及 材料性質 對 動脈粥樣硬化斑塊 應力分佈之影響
原文: "Quantifying Effects of Plaque Structure and Material Properties on Stress Distributions in Human Atherosclerotic Plaques Using 3D FSI Models"
作者與出處: Dalin Tang, Chun Yang, Jie Zheng, Pamela K. Woodard, Jeffrey E. Saffitz, Gregorio A. Sicard, Thomas K. Pilgram, and Chun Yuan J Biomech Eng. Author manuscript; available in PMC 2006 June 5.
連結: http://www.pubmedcentral.nih.gov/picrender.fcgi?tool=pmcentrez&artid=1474006&blobtype=pdf  
                                                                                                                                                                                                                                                                                                   
中文: 局部最大應力假說 及 斑塊破裂指數 於粥狀硬化斑塊之評估
原文: "Local Maximal Stress Hypothesis and Computational Plaque Vulnerability Index for Atherosclerotic Plaque Assessment"
作者與出處: Dalin Tang, Chun Yang, Jie Zheng, Pamela K. Woodard, Jeffrey E. Saffitz, Joseph D. Petruccelli, Gregorio A. Sicard, and Chun Yuan Ann Biomed Eng. Author manuscript; available in PMC 2006 June 5.
連結:  http://www.pubmedcentral.nih.gov/picrender.fcgi?tool=pmcentrez&artid=1474005&blobtype=pdf 

中文: 利用 高解析度之核磁共振 及 計算生物力學 進行 冠狀動脈硬化斑塊破裂 之定量評估
原文: "Quantitative Assessment of Coronary Artery Plaque Vulnerability by High-Resolution Magnetic Resonance Imaging and Computational Biomechanics: A Pilot Study ex Vivo"
作者與出處: Jie Zheng, Issam El Naqa, Faith E. Rowold, Thomas K. Pilgram, Pamela K. Woodard, Jeffrey E. Saffitz, and Dalin Tang Magn Reson Med. Author manuscript; available in PMC 2006 June 5.
連結: http://www.pubmedcentral.nih.gov/picrender.fcgi?tool=pmcentrez&artid=1474004&blobtype=pdf

2005
中文: 腹部動脈瘤之 流固耦合分析: 不對稱及管璧厚度之影響
原文: "Fluid-structure interaction in abdominal aortic aneurysms: effects of asymmetry and wall thickness" 
作者與出處: Scotti CM, Shkolnik AD, Muluk SC, Finol EA BioMedical Engineering OnLine 2005, 4:64 (4 November 2005)
連結: http://www.biomedical-engineering-online.com/content/4/1/64  


2004
中文: 針對人工薄膜組織 進行細胞與薄膜組織應變之關係研究 
原文: "The Relationship between Cell and Tissue Strain in Three-Dimensional Bio-Artificial Tissues" 
作者與出處: J. Pablo Marquez, Guy M. Genin, George I. Zahalak, and Elliot L. Elson Biophys J. 2005 February; 88(2): 778–789. Published online 2004 December 13. 
連結: http://www.pubmedcentral.nih.gov/picrender.fcgi?tool=pmcentrez&artid=1305155&blobtype=pdf

中文: 血管系統中 較易感染 (動脈)粥樣硬化之區域 及 具抵抗力之區域 所產生之 動脈波型 所誘發 明顯的 內皮症狀研究  
原文: "Distinct endothelial phenotypes evoked by arterial waveforms derived from atherosclerosis-susceptible and -resistant regions of human vasculature"
作者與出處: Guohao Dai, Mohammad R. Kaazempur-Mofrad, Sripriya Natarajan, Yuzhi Zhang, Saran Vaughn, Brett R. Blackman, Roger D. Kamm, Guillermo Garc?a-Carde?a, and Michael A. Gimbrone, Jr.     Proc Natl Acad Sci U S A. 2004 October 12; 101(41): 14871–14876. Published online 2004 October 4.
連結: http://www.pubmedcentral.nih.gov/picrender.fcgi?tool=pmcentrez&artid=522013&blobtype=pdf   


2003

中文: 使用三維黏彈性模型進行 細胞變形分析 與 實驗驗證
原文: "A Three-Dimensional Viscoelastic Model for Cell Deformation with Experimental Verification"
作者與出處: Helene Karcher, Jan Lammerding, Hayden Huang, Richard T. Lee, Roger D. Kamm, and Mohammad R. Kaazempur-Mofrad Biophys J. 2003 November; 85(5): 3336–3349.
連結:  http://www.pubmedcentral.nih.gov/picrender.fcgi?tool=pmcentrez&artid=1303611&blobtype=pdf
                                                                                                                                                                                                                                                                                        
中文:  血管鈣化 對於 (動脈血管)粥樣硬化斑塊力學穩定度 之影響
原文標題: "The Impact of Calcification on the Biomechanical Stability of Atherosclerotic Plaques" 
作者與出處: Hayden Huang, SM; Renu Virmani, MD; Hesham Younis, MA; Allen P. Burke, MD; Roger D. Kamm, PhD; Richard T. Lee, MD
連結: http://circ.ahajournals.org/cgi/content/full/103/8/1051?maxtoshow=&HITS=10&hits=10&RESULTFORMAT=&fulltext=adina&searchid=1&FIRSTINDEX=0&resourcetype=HWCIT


您所導入的ADINA系統, 有崴昊科技享譽國際的技術顧問團隊, 為您作全方位的技術支援, 而不再只是軟體操作的教學, 甚或只是軟體販賣.如果您對簡易,快速而準確的非線性分析有興趣, 請今天就與我們聯絡.

FEA-Opt logo




All brand or product names are trademarks or registered trademarks of their respective holders. Copyright of all materials in the links belongs to their respective authors. I am not responsible for any contents inside any links. 

c)Copyright, 1998-, Shen-Yeh Chen, Ph.D. All rights reserved.陳申岳

www.FEA-Optimization.com : Finite Element Analysis, Finite Element Method, FEA, FEM, CAE, and FEA-Based Optimization, SmartDO, CAE,崴昊科技,有限元,有限元素, CAE,優化設計, 最佳化設計,CAE顧問,SmartDO, ANSYS, LS-DYNA, ADINA, consulting services and software,崴昊科技,顧問服務, 軟體,陳申岳, S-Y. Chen, Shen-Yeh Chen,有限元, 有限元素, CAE,優化設計,最佳化設計,CAE顧問,SmartDO, ANSYS, LS-DYNA, ADINA, consulting services and software, 顧問服務, 軟體, CAE,優化設計, 最佳化設計,陳申岳, S-Y. Chen, Shen-Yeh Chen,FEA-Opt Technology, 崴昊科技,FEA-Opt Technology,SmartDO, 崴昊科技,CAE軟體, 結構分析, CAE顧問, CFD分析, 熱流分析, 熱傳分析, 流固耦合, 多重物理分析 CAE software, structural analysis, stress analysis, CAE,優化設計, 最佳化設計, consulting services, CFD analysis, heat flow analysis, heat transfer analysis, FSI analysis, multiphysics analysis, CAE,優化設計, 最佳化設計, CAE,優化設計, 最佳化設計,CAE顧問,即時雙向流固耦合FSI,直接雙向流固耦合FSI, 即時雙向流固耦合FSI,直接雙向流固耦合FSI,即時雙向流固耦合FSI,直接雙向流固耦合FSI, 電腦輔住最佳化設計, CADO, Computer Aided Desgin Optimization,電腦輔住最佳化設計, CADO, Computer Aided Desgin Optimization,電腦輔住最佳化設計, CADO,電腦輔住最佳化設計, CADO, Computer Aided Desgin Optimization,CAE最佳化設計,CAE優化設計,CAE最佳化設計,CAE優化設計, 最適化設計,最適化設計,最適化設計,最適化設計,最適化設計,multiphysics analysis,